EC-100 is a durable 100% acrylic elastomeric coating designed specifically for use over new polyurethane foam roofing systems, recoating existing foam roofing systems and for conventional roofs requiring superior adhesion and solar reflectance.
EC-50 NR is a durable 100% acrylic elastomeric coating designed specifically for use over new polyurethane foam roofing systems, recoating existing foam roofing systems and for conventional roofs requiring superior adhesion and solar reflectance.
EC-6300 is an Aqueos Acrylate Protective Coating originally designed for the purpose of recoating TPO and PVC roofing systems. Although this long-lasting coating adheres to SPF and a number of other membranes, it also has superb adhesion to white single ply roofs and has impeccable resistance to dirt pick-up.
Pro-White is a high tensile premium 100% acrylic elastomeric coating combining non-migratory fire retardants with superior reinforcing laminar pigments. This coating also provides excellent abrasion and hail resistance with outstanding UV protection while maintaining exceptional flexibility at below freezing temperatures.
Super Putty was designed as a patching compound for repairing cracks, splits, tears and open voids in existing spray polyurethane foam, built-up and modified bitumen, metal and single ply surfaces.
Super Putty is a premium grade elastomeric water-based compound which combines acrylic polymers with high solids content. This durable acrylic patching compound has outstanding adhesion, elongation, UV stable, weatherability and can be applied to a variety of roofing surfaces.
SuperiorSeal Topcoat is a premium quality, elastomeric coating which combines acrylic polymers with a hi-solids content of titanium dioxide for long lasting durability and ultraviolet resistance. SuperiorSeal Topcoat is uniquely engineered to resist ponding water and has been proven effective for years on millions of feet of commercial, industrial and residential roofing.
TechGuard Cementitious Topped Foam is a two-part system designed for roofing applications where the compressive strength provides a greater resistance to foam fracture than is offered by foams of lower density. To achieve a class A rating over a combustible deck substrate.
UltraShield Topcoat is a premium quality acrylic elastomeric coating utilizing hi-tech acrylic polymer emulsions and superior reinforcing laminar pigments. This technically advanced combination allows outstanding adhesion properties along with excellent tensile, elongation, and dirt pick up resistance while maintaining flexibility through thermal cycling, which makes UltraShield Topcoat an ideal choice for durability, weather resistance and protection from ultra violet degradation.
Pro-Tech’s Bleed Block is a one-component, water-based elastomeric base coating and sealer that is highly resistant to disbanding and prohibits passage of asphaltic oils from existing asphalt roof materials.
Silicone Coating SC 900 is a 100% silicone, high solids, solvent-free, one-component, moisturecuring silicone rubber roof coating system for use on existing smooth asphaltic BUR, smooth or granulated cap sheet, single ply roof membrane, well adhered acrylic coating, metal, concrete, sprayed-in-place polyurethane foam and various aged membrane roofing. The system provides a long-term weathering protection and resists the effects of ozone, ultraviolet radiation and temperature extremes.
Butter Grade is an exceptionally versatile, tough yet flexible membrane that is easily brush or trowel-applied at thickness up to. ¼” thick. It is also an excellent repair material for direct-to-metal (DTM) repairs, spray polyurethane foam, smooth built-up, smooth modified, bitumen, granulated modified bitumen, aged single ply roof membrane, flashings, fasteners and drains.
PTP Silicone Butter Grade is a premium grade Silicone based compound which combines silicone polymers with high solids content. This durable silicone patching compound has outstanding adhesion, elongation, UV stable, weatherability and can be applied to a variety of roofing surfaces.
InsulBloc is a two component, self-adhering, seamless, closed cell, spray-applied polyurethane foam system. This system has been formulated with highly insulating HFO as the blowing agent. The InsulBloc insulation system is suitable for application on the exterior and interior side of Type I, II, III, IV and V buildings as well as other insulation applications.
InsulStar®Light 12-008 is a two component, one-to-one by volume, no-mix, self-adhering, seamless spray applied open-cell polyurethane insulation system. InsulStar®Light has been formulated with water as the blowing agent and does not contain CFC, HCFC, HFC or formaldehyde. InsulStar®Light is suitable for use in Type I, II, III, IV & V construction.
InsulBloc is a two component, self-adhering, seamless, closed cell, spray-applied polyurethane foam system. This system has been formulated with highly insulating HFC-245fa as the blowing agent. The InsulBloc insulation system is suitable for application on the exterior and interior side of Type I, II, III, IV and V buildings as well as other insulation applications. It complies with AC 377 and ASTM C1029. InsulBloc is certified on ABAA projects.
Pro-Tech PT3 is a two-component, closed-cell spray polyurethane foam system utilizing an EPA-approved 'Zero Ozone- Depleting blowing agent with extremely low (less than 1) global warming potential. Pro-Tech PT3 has an estimated theoretical yield range of 3,100-3,300 board feet per set.
PTP 2.8 HFO 10-016 is a two component, HFO blown, all PMDI based spray polyurethane foam system designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing system. PTP 2.8 HFO is available in multiple speeds for use in varying temperature conditions. PTP 2.8 HFO has been formulated to spray at a 2.8-pound density, depending on lift thickness, and may be used in the applications of the TechGuard roofing systems.
A-P Primer is a low solid water-based 100% acrylic primer designed to properly prepare a variety of roofing substrates prior to the installation of spray polyurethane foam and acrlyic elastomeric topcoats. A-P Primer can be used over wood, concrete, granulated build-up or modified bitumen, metal and single ply membranes as well as previously coated roofing substrates.
Modified Asphalt Primer is an acrylic modified asphalt primer designed for use over various existing roofing substrates. This cost-effective primer has outstanding adhesion characteristics. Modified Asphalt Primer can be used over wood, concrete, granulated build-up or modified bitumen, metal and single ply membranes as well as previously coated roofing substrates.
MUP is a liquid applied primer that is based on an SBR resin. It is a roof coating primer designed to achieve adhesion to a number of different substrates but specifically to TPO and PVC membrane.
Pro-Tech Cleaner Concentrate is an environmentally friendly, non-toxic cleaning product used to effectively clean and prep a roof prior to the application of protective coating products.
Rinseable Primer (RP-2) is a low viscosity sprayable liquid used to pre-treat and clean roof membranes. Use RP-2 to pretreat black EPDM rubber roof membrane prior to power washing and application of elastomeric roof coatings. It may also be used to clean TPO membrane prior to applying EC-6300. With its neutral pH and alkyl phenol ethoxylate (APEO)-free surfactants, RP-2 is noncorrosive and requires no special handling requirements. It improves adhesion to EPDM and TPO roof membranes and is designed for use with EC-100 and EC 6300.
Tietex Roof Fabric Stitch-Bonded Polyester is one of the strongest materials available to the roofing industry for use as reinforcement in cold process roofing. Stitch-bonding offers an unusual combination of high strength properties with good elongation for excellent thermal stress force accommodations.
Tietex Roof Fabric is a soft polyester that will readily conform to embedded gravel and standing seam metal roof decks. Recommended roof types include new plywood roofs, some granulized roofs, walk decks or any roofs requiring extensive repairs. Tietex Roof Fabric is also used as a stabilizer for areas that experience ponding water. It is much easier to handle and apply properly than other soft polyester sheets.
Dust Control is a low solids water-based acrylic copolymer designed to properly prepare a variety of soils. Dust reduction is a result of the binding of particles due to copolymers adhesive properties.
This cost-effective Dust Control copolymer has outstanding binding qualities while also providing soil stabilization needed for protection of slopes, embankments and sediment control.
We are excited to announce that Pro-Tech Products is now offering Custom Roof Inspection Kits for sale exclusively to our Certified Applicators. These kits are designed to enhance your inspection process, ensuring thorough and efficient assessments and Data collection for your records and Warranty process.
TerraThane 24-003 is a 4lb hydrophobic / hydroinsensitive, MDI-based, water blownsystem that is designed for exceptional spread and lifting capacity. The hydrophobic nature of 24-003 allows it to maintain exceptional physical properties even in saturated conditions. Available with NSF/ANSI 61 Section 5 – 2017 certification.
TerraThane 24-010 is a 2.8 water-blown, MDI-based geotechnical polyurethane formulated for quick expansion and pinpoint control for lifting and leveling. 24-010 is available with an NSF/ ANSI 61 Section 5 – 2017 certification.
TerraThane 24-011 is a 5lb hydrophobic / hydro-insensitive, MDI-based, water blown system that is formulated for exceptional spread and lifting capacity. The hydrophobic nature of 24-011 allows it to maintain exceptional physical properties even in saturated conditions. Available with NSF/ANSI 61 Section 5 – 2017 certification.
PTP 2.8 HFO 10-016 is a two component, HFO blown, all PMDI based spray polyurethane foam system designed for use as a self-adhering, seamless, high insulating, spray applied rigid polyurethane foam roofing system. PTP 2.8 HFO is available in multiple speeds for use in varying temperature conditions. PTP2.8 HFO has been formulated to spray at a 2.8 pound density, depending on lift thickness, and may be used in applications of the
PRO-TECH URETHANE P-2.8 is a two-part system designed for roofing applications where the compressive strength (55 psi) provides a greater resistance to foam fracture than is offered by foams of lower density. PRO-TECH Urethane P-2.8 has been formulated with HFC 245 FA as the blowing agent.
